ATtiny Programmer Adapter v1.1 Readme
By insideGadgets - http://www.insidegadgets.com / support@insidegadgets.com

A programmer adapter for all the ATtiny DIP models with support for a crystal.

SPECIFICATIONS
=================================
PCB Board: 49mm x 40.5mm


PARTS REQUIRED
=================================
- 8 pin IC socket (1) - [U1]
- 14 pin IC socket (1) - [U2]
- 20 pin IC socket (2) - [U3, U4]
- 28 pin IC socket (1) - [U5]
- Male headers (For ISP) - 3 pin (2) - [J1]
- Male headers (For ISP) - 5 pin (2) - [J2]
- Female headers (For connecting the crystal and crystal capacitors) - 2 pin (4) - [JP1, JP2, JP3, JP4]


REVISION HISTORY
=================================
v1.1 (7 August 2012)
- Updated PCB labels
- Connected AVCC and GND
- Added optional crystal capacitors

v1.0 (16 July 2012)
- Initial Release


DIRECTORY LISTING
=================================
ATtiny_Programmer_Adapter_v1.1.brd - Eagle Board File
ATtiny_Programmer_Adapter_v1.1.sch - Eagle Schematic File
ATtiny_Programmer_Adapter_v1.1_PCB_Guide.png - PCB Guide
ATtiny_Programmer_Adapter_v1.1_Schematic.png - Schematic


----------------------------------------------------------------------------------------------
(c) 2011-2012 by insideGadgets
http://www.insidegadgets.com

This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
http://creativecommons.org/licenses/by-nc/3.0/